After seeing an advert for a cheap USB based TV tuner which could be easily modded into a wideband radio receiver, I decided to spend $30 and get one. I was not disappointed.
It is based on the RTL2832 chipset found in some cheap DVB-T TV tuners and can technically cover from DC up to a few GHz making it ideal for receiving everything from AM radio, Shortwave, FM radio, Police, Aircraft and Cellphones to name a few as well as receive TV. Basically if its a radio signal chances are you can listen in or decode the signal.
Some however will not receive shortwave out of the box but the mod is easy enough to do if you can solder a single wire to one of the pins on the RTL2832. Easy said than done due to the size of the chip and pins on the thing. I ended up soldering the wire to the capacitor connected to that pin elsewhere on the board and can now receive the full range of radio spectrum below 24 MHz including AM Radio. I ended up getting the
Rafael Micro R820T USB tuner as it has the largest frequency range compared to others based on the RTL2832 chipset.
More info here
http://www.rtl-sdr.com/about-rtl-sdr/
Comments
So basically this would work with any USB TV Turner card? I am quite curious to try this
It sure will so long as its based on the RTL2832 chipset. The software requires that specific chipset in order to work.
I didn't know about the shortwave mod. Going to do this soon, probably tonight. Cool
I found sdr# was the best software. http://sdrsharp.com/
I got mine for USD$10.00 though... (including a mcx to coax adapter)
They reckon that using an up converter for shortwave provides better performance, its called a ham it up converter or something. You can solder the wire to either pin 1 or pin 2 of the RTL2832. Just select either I or Q branch (at least one will work) in the configure menu and it should work. I ended up cutting the cheap antenna off of the cable and soldering an "N" connector to the cable. I use an N to BNC adapter to connect it to my receive antenna array. I have a 10 meter tall mast with my antennas mounted up top of it. It also is used as the transmit antenna for Radio Totse (wire antenna running up the inside of the mast).
Before i buy a new one can anyone recommend me a similar sdr for around USD$30.00
Shit that sucks bro. Did you try to solder to the capacitor or to the pins on the RTL chipset?.
Already ordered a new one.
A dab of hot glue soon solves the problem of wires becoming detached. Its like a wonder tool for electronics.
Also chloroform
Too bad my 2003 chinese computer died.