The 4 pololu stepper drivers have arrived, and after many attempts at the toner-transfer method I've succeeded using thin glossy recycled magazine paper. There are several splotches of copper on the other side that didn't get removed (I want it blank), but I can touch those up with acid and a q-tip. Other than that, it's…
Update update update update! Decided on generation 7 electronics. It's basically the RAMPS, only cheaper due to less components and is a single board solution. Problem is I'm going to have to etch my own board for it, I've never done it before though it doesn't seem to be very hard. Just drilling the 360-something holes…
Soon as those air defenses are neutralized, he's finished. He might prolong it by occupying public/civilian buildings, but his fate is sealed. You'd think with all those air-defenses, there would be some kind of cruise missile defense too.
Also, apparently I'm supposed to be using a special coaxial cable for my digital coax audio. I'm using a normal RCA plug extender connected to another rca plug. Is this bad, is there any real difference, should I get a real coax cable?
I'll look for the file, but it didn't work properly. I didn't get the tolerances correct for the parts fitting together. I think I'll remake it correctly, though. I did get it semi-working at one point, but it was using mis-matched pieces from one of 3 attempted prints I did. Might even try it tonight, been looking for…
Fortress is complete. The walls are over a foot thick, and they've all turned to solid blocks of ice due to adding water. I'd like to see a vehicle try to hit it...two sections of it that were put up for less than an hour supported 300+ lbs(We had to climb up to make parts of the roof). Going to keep adding layers of water…
It's real, pictures were taken at different times of day. Might take a video in a bit, we're going to go out and drink in it for the rest of the night, perhaps set up a hookah.
It's a profitable business; so what? This doesn't prove or disprove anything other than people selling a product in high demand make large sums of money.
So, what's stopping somebody like myself from taking a trip over there and raping all the little girls? Seems like all they'd do is force me to marry a loli or kill her for me, and I get off completely free.
Although I believe that exceptions are more common than you make them out to be (Although still pretty rare, and I'd change "All woman" to "Most woman" in the second to last paragraph), you hit the nail on the head with that one. And you used biology to explain it, nicely done :thumbsup: Also, this.
Have a friend who does, or friends with anyone who works in a machine shop? How about an aluminum wirefeed? Other than that...fiberglass? that'd be strong. Epoxy would probably hold...
I read this drunk last night and fell on the floor laughing :hai: It's getting pretty bad at my school, there's this freshman kid who looks like he's still in grade school, nearly half my height, and all he does is spray meme's everywhere all day. His name is Jack. Yesterday he printed out and taped to the wall a picture…
Normally I'd agree, but it seems that where ever they go all they do is cause drama, and the place turns into a shithole shortly after. I'd like to see what happens without them.
Fixed the center of the O a bit at a friends house, although by the time I left it still had not updated, it only appeared if you were 100% zoomed in. How long does it take to update anyways?
Another update soon with pictures, sorry it's been a while. I have 95% of the mechanical build completed, although I ran into some complications trying to put together the Z axis (The online build instructions are completely inaccurate when putting together the Z axis pulleys - I had to use 6 more washers than it stated to…
This. Is exactly it. It's one of the reasons I get annoyed at people complimenting most things I do/build. I get the designs from the internet. I might understand the concept behind how it works and why it works, but I didn't come up with it. Any monkey can follow directions, it takes a man to come up with an original…
Huzzah! My graphics card gets here in two days so I can use my computer, but until then, some developments.... The parts came, everything is okay quality. It took rather long as the guy we ordered from went on break for christmas and left some person incharge who didn't do shit. I've been putting it together for the last…
Exactly....last time I attempted to use it, the stream refused to light. Which confused me, because nothing that would have affected the stream or the pilot light had changed since last time that I was aware of.
I get the feeling I'm one of the few who know anything about it around here...the only other person that has experience that comes to mind is Vineman, he's probably the number one person to talk to. I only said AP because it is the most likely to be used due to availability of the chemicals needed. Hell, go make some RDX…
Ah, that sounds like it'd work great! And yeah, power washer gun is what they used. I still don't have mine working, other projects taking priority over it, but it'll work again eventually. Hope it works out for you, just remember to be careful. And yeah, my avatar is actually me shooting my flamethrower resized.
Any 'normal' hair style really, although I'm starting to like my girlfriends (short in the back, long in the front). The only examples of this I can find are shitty, and the only picture I have on this computer is rather myspace-esque, though you should be able to get the idea;
I'm going to read this later, but I completely agree with the OP from the little I've skimmed. I think there should be some discussion on statutory rape, and what a load of shit it is. My views are rather basic on it. If the law cannot be changed, at least change the name. Consensual sex is not rape, no matter what you…
This is usually a good rule of thumb for the popular/preppy crowd of females, can't be applied to all (obviously there will always be outliers). You guys should see some of the little whores in my town, most just became freshmen in highschool this year, the middle school is pretty bad though. Nothing like being at the…
This is usually how I try to explain things to people, they need something they understand to relate it to if possible. Another good one is explaining electrical systems using water/pressure systems.
Sticky? hell, if you think so :) I don't know what you mean by high clearance on CMS, but go ahead. The lack of updates is because I'm waiting for the hardware parts to arrive, already 2 days late of the estimated time. That, and I'm out of school so I can't print the remaining parts at the moment. So far, so good though.